CASSIDA CHAIN OIL 320 SPRAY
Synthetic chain lubricant in spray form for food and beverage processing equipment
- Excellent adhesive properties minimise “fling-off” in use and wash-off by both cold and hot water
- Extend the service life of chains and reduce downtime due to superior wear prevention and corrosion protection, even under wet or aggressive conditions
- Easily applied – spray directly onto chain
- Neutral odour and taste
Certifications and Specifications
- NSF H1
- NSF ISO 21469
CASSIDA CHAIN OIL 320 SPRAY is a fully synthetic high performance, anti-wear chain oil which has been specially developed for use in machinery used in the food and beverage processing and packaging industry.
It is based on a careful blend of synthetic fluids and selected additives chosen for their ability to meet the stringent requirements of the food and beverage industry.
Registered by NSF (Class H1) for use where there is potential for incidental food contact. Produced according to FLT Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented and form part of the quality and hygiene management systems ISO 9001 and ISO 21469.
• Drive and transport chains in the food industry
• Slideways, levers, joints and bolts, ropes, spindles and guide pulleys
• Also intended for use in equipment manufacturing food packaging
Seal and Paint Compatibility
Compatible with the elastomers, gaskets, seals and paints normally used in food machinery lubrication systems.
Handling and Storage
All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +30 °C. Provided that the product has been stored under these conditions we recommend that the product be used within 3 years from the date of manufacture.
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.