Jump to content


Synthetic extreme temperature chain lubricant for food and beverage processing equipment

Performance Features

  • Operates as a dry film at extreme temperatures.
  • Effectively prevents the adherence of food particles and further minimising chain contamination.
  • The result is effi cient lubrication, reduced wear, lower energy consumption and the elimination of expensive maintenance routines associated with cleaning chains and conveyors.
  • White in colour and clean to use
  • Provides excellent wet fi lm lubrication for ambient and low temperature applications
  • Easily applied by either brush, through baths or by automatic lubrication systems
  • Neutral odour and taste
  • Solvent-free formulation to provide greater safety in use
  • Reduces wear on chains and guides, increases chain longevity
  • Does not attract fl our or crumbs from food being baked

Certifications and Specifications

- NSF H1
- Kosher
- Halal


CASSIDA CHAIN OIL HTX is a unique synthetic, high performance chain lubricant developed to provide excellent lubrication without producing deposits and lacquers. It has been specially formulated for the food industry to lubricate drive and transport chains at elevated temperatures.
It is based on an advanced blend of synthetic fluids, solid lubricants and selected additives chosen for their ability to meet the stringent requirements of the food and beverage industry.
Registered by NSF (Class H1) for use where there is potential for incidental food contact. Produced according to FLT Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented and form part of the quality and hygiene management systems ISO 9001 and ISO 21469.


• Drive and transport chains in the food industry
• Also intended for use in equipment for manufacturing food packaging

General Instructions

It is normal that during storage the dispersion can become slightly inhomogeneous. It is therefore important to agitate the product before use.
Do not apply the product on very hot chains. Recommended application temperature: <150°C.

Seal and Paint Compatibility

Is compatible with most of the elastomers, gaskets and seals normally used in food machinery lubrication systems. Nitrile rubber (NBR), Fluoro-Silicone or Vinyl-Methyl Polysiloxane (Q) are recommended especially where high temperatures are involved. Polyurethane based elastomers, leather, cork, asbestos paper and board should be avoided.

Handling and Storage

All food grade lubricants should be stored separately from other lubricants, chemical substances and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +40 °C. Provided that the product has been stored under these conditions we recommend that the product be used within 2 years from the date of manufacture. Upon opening a pack, the product must be used within 2 years (or within 2 years of date of manufacture, whichever is the sooner).


  • Food

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 (0) 621-3701-0