Jump to content


Special cleaner for dynamic cleaning of components in operation

Performance Features

  • excellent cleaning effect
  • very good wear protection during dynamic cleaning
  • protects against corrosion
  • shelf life: = 5 years
  • versatilely applicable


CEPLATTYN CLEANER is a hydrocarbon cleaner with a very good cleaning effect. Its special combination of active agents enables the cleaner to dissolve and remove greases, oils, waxes and any other stubborn dirt.

Field of application

CEPLATTYN CLEANER was especially developed for the dynamic cleaning of Open Gears. The product is also suitable for the cleaning of chains, wire ropes, articulated joints, other metallic components, etc. CEPLATTYN CLEANER is neutral to metals.

Method of application

For the cleaning of Open Gears in the cement, lime, gypsum and mining industry, as well as in coal processing. CEPLATTYN CLEANER is applied to the surface to be cleaned using a suitable high-pressure cleaner. In terms of Open Gear cleaning and compared to conventional Open Gear cleaners, CEPLATTYN CLEANER allows a consumption reduction of up to 50% while maintaining its cleaning effect.


CEPLATTYN CLEANER may only be applied on Open Gears by specialists trained by FUCHS LUBRITECH. CEPLATTYN CLEANER may attack paints, lacquers and plastics, thus a compatibility test is required prior to its application.


  • Cement
  • Mining, quarrying, exploration

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 (0) 621-3701-0