GLEITMO 920
Molybdenum disulfide bonded film lubricant
Performance Features
- temperature range: -180 / +250 °C
- produces a dry, strongly adhering lubrication film
- carries very high loads
- is resistant to mineral oils after heat curing
- ensures a constant coefficient of friction
- improves the wear-in behaviour and the load carrying ability of oil- or grease-lubricated machine elements
- offers clean assembly
Description
GLEITMO 920 is an air drying bonded film lubricant, solvent-based with organic Binder. It can be heat-cured, and then it is resistant to mineral oils. GLEITMO 920 forms on metal surfaces a firmly adhering, non-ageing molybdenum disulfide bonded film lubricant with good lubricating properties.
Field of application
The main application is at low sliding speeds and high loads as well as in combination with oil and greases. Examples of application: Wear-in and emergency lubrication of differential gears and bearings, dry lubrication of threaded spindles, cores of magnets, wire clamps, adjustable threads and mechanisms, bolt joints, sliding planes, threads, nuts, tension pins.
Method of application
Compressed air and airless spraying systems are suited best. Immersion is expedient for large quantities of small parts. Due to uneven coating thickness, painting by brush or roller is recommended only if spraying or immersion is not possible. In the case of spraying installations, containers with agitator are recommended. Sliding surfaces should be carefully degreased with solvent and allowed to dry. To increase adhesion and therefore the lifetime of the coating, pretreatment of the surfaces is recommended by sand-blasting or phosphatising.
Note
Stir well before use! Shelf-life: 18 months in closed original container at ambient temperature.
Industries
- Automotive
- Machinery, equipment
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
