GLEITMO HMP 8040
Antifriction film for coating massproduced items
Performance Features
- Operating temperature range of the dry film: -40 / +110 °C
- Produces dry, colourless, non-slipping and non-abrasive lubrication film
- Permits easy application by means of dipping
- Guarantees constant coefficients of friction with the minimum of spread, thereby achieving calculable and reproducible installation results
- Adheres very strongly to all material surfaces
- Can be thinned with water if required
- Contains UV-additive for coating control under UV-light (340-380 nm)
Description
GLEITMO HMP 8040 is a suspension of high molecular polymers in water.
The antifriction film, which is left after it has been applied, adheres very well to the widest variety of surfaces and forms a satiny and non-slip film, which does not affect the properties of the coated material.
Field of application
GLEITMO HMP 8040 was developed specially for coating mass-produced thread-grooving and self-tapping screws.
Method of application
GLEITMO HMP 8040 can be thinned with water (drinking quality) in accordance with the lubrication engineering requirements in question.
Note
Protect from frost!
May be stored in sealed containers at room temperature for up to 12 months.
Industries
- Automotive
- Machinery, equipment
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
