GLEITMO SFL 9025 OX
Water-based MoS2 Solid Film Lubricant
Performance Features
- temperature range: -180 / +250 °C
- resistant to mineral oil and synthetic fluids
- forms a dry, firmly adhering lubricating film
- resistant to high loads
- produces a low, constant friction
- prevents from seizure of materials with a tendency towards cold welding
- facilitates assembly
- prevents from stick-slip friction
- for use with oxygen fittings up to 60 °C and 20 bar (test report available)
Description
GLEITMO SFL 9025 OX is a water-based Solid Film Lubricant. Its active lubricating component is a synergistically acting combination of solid lubricants with a predominant portion of molybdenum disulphide.
Field of application
GLEITMO SFL 9025 OX is especially designed for threaded caps on oxygen cylinders, slideways and guideways, adjusting parts and screws in the presence of oxygen.
Method of application
GLEITMO SFL 9025 OX can be applied by spraying, dipping or by brush or roller onto the thoroughly cleaned and degreased sliding surfaces. Coating of one slide surface is often enough. Burrs and sharp edges are to be avoided. GLEITMO SFL 9025 OX should be stirred well before use. If needed, it can be diluted using demineralized water. Preheated surfaces allow fast drying and film development. The life of the lubricating film can be increased by roughening the surface to be coated.
Note
Stir well before use! Protect from freezing. Shelf life: 12 months in closed original containers at room temperature
Industries
- Automotive
- Machinery, equipment
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
