Jump to content

HYKOGEEN ZN 10

Release agent for zinc pressure die casting

Performance Features

  • ready for use
  • reduced smoke and odour
  • non-water-miscible
  • excellent lubricating and releasing properties
  • clean surfaces
  • can be used sparingly, very economical

Description

HYKOGEEN ZN 10 is a non-water-miscible, fluid moulding release for pressure die casting. Equal pro-portions of ester oils, hydrocarbons and additives guarantee excellent release and lubrication perfor-mance.
HYKOGEEN ZN 10 causes reduced smoke and odour.

Fields of use

HYKOGEEN ZN 10 is a special formulation for use in zinc pressure die casting.

Application

HYKOGEEN ZN 10 is ready for use.
It is best applied by using automatic spraying devices. Hand spraying devices may also be used.
It can be used sparingly as a result of its excellent release performance.

Note

HYKOGEEN ZN 10 is ready for use. If necessary it can be diluted by hydrocarbon-based solvents.
Attention: Note flash point!

Industries

  • Casting
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0