LUBRODAL F 27 AL
White die lubricant for hot forming of non-ferrous metals
Performance Features
- for forging of aluminium
- easily to dilute with water
- closed and well adhesive lubricant film after spraying
- excellent wetting on the tools
- free of wax and mineral oil
Description
LUBRODAL F 27 AL is a new type of die lubricant for the forging of aluminium and its different alloys. The lubrication-, releasing- and wetting-effects of this wax- and mineral-oil-free emulsion have been optimised by different additives. This provides excellent forging results, improves die life and protects from aluminium adhesion. Due to the absence of wax and mineral oil a clean press environment is possible and the waste water pollution is reduced to a minimum.
Application
LUBRODAL F 27 AL is supplied as a stable concentrate that can be easily diluted with water in the needed ratio, prior to use. The optimum mixing ratio depends on the complexity of the forged parts, process- and contact-times and the desired cooling effect. The optimum dilution ratio has to be determined in practice. Dilutions in a range from 1:3 to 1:10 are common. LUBRODAL F 27 AL can be applied on the tools by manual or automatic spraying devices.
Industries
- Forging
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
