PLANTOLUBE POLAR 15 S
Description
Range PLANTOLUBE POLAR S
PLANTOLUBE POLAR S oils are environmentally friendly, rapidly biodegradable fluids, with an extremely low pourpoint. Thanks to their very high VI they can be used in a wide temperature range. PLANTOLUBE POLAR S oils offer outstanding protection against corrosion and wear. Highly ageing resistant. Surpass the requirements of DIN 51524-3:HVLP (except TOST test), ISO 15380: HEES, except: TOST Test.
| Density at 15 °C | 899 kg/m³ |
| Flash point cleveland | 156 °C |
| Kinematic viscosity at 40 °C | 15 mm²/s |
| Kinematic viscosity at 100 °C | 4.1 mm²/s |
| VI | 199 |
| Pourpoint | <-48 °C |
Main application area
Gears, bearings, actuators used at extremely low temperatures (e.g. polar regions). Hydraulic systems operated under low temperatures can also be run with oils from the PLANTOLUBE POLAR S range. The changeover guidelines according to ISO 15380 must be observed.
Industries
- Agriculture, forestry
- Construction
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
