PLANTOSYN 68 HVI
Description
Range PLANTOSYN HVI
Environmentally friendly hydraulic and circulating oils based on synthetic saturated esters. Rapidly biodegradable acc. OECD 301 B > 60%. High wear protection, good seal and non-ferrous metal compatibility, excellent oxidation stability. Fulfills the requirements of HEES hydraulic oils according to ISO 15380 and HVLP according to DIN 51524-3 (except TOST test).
Awarded the EU Ecolabel (EEL)
| Density at 15 °C | 916 kg/m³ |
| Flash point cleveland | 280 °C |
| Kinematic viscosity at 40 °C | 68 mm²/s |
| Kinematic viscosity at 100 °C | 10.6 mm²/s |
| VI | 143 |
| Pourpoint | -30 °C |
Main application area
Suitable for all mobile and stationary hydraulic systems for which the use of a rapidly biodegradable HEES hydraulic oil according to ISO 15380 is recommended (e.g. in agriculture and forestry). Can be used where unsaturated, synthetic esters have failed. Extension of oil changing intervals posible. Oil sump temperature: -30 °C to 100 °C or higher. The change-over guidelines according to ISO 15380 must be observed.
Approvals:
MANNESMANN; REXROTH; Sauer SUNDSTRAND
Industries
- Agriculture, forestry
- Construction
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
