Jump to content

RENOLIN B 10 VG 32

Description

Range RENOLIN B
Lubrication and hydraulic oils with additives to improve the ageing and oxidation stability. Good wear protection, demulsifying (good water seperation), good air release properties, zinc containing AW/EP additive system.
The RENOLIN B range meets and surpasses the minium requirements of HLP hydraulic oils acc. to DIN 51524-2.
ISO 6743-4: HM
ISO 6743-6: CKC
ISO 11158: HM
B 10: HLP 32

 

Density at 15 °C876 kg/m³
Flash point cleveland205 °C
Kinematic viscosity at 40 °C32 mm²/s
Kinematic viscosity at 100 °C5.5 mm²/s
VI109
Pourpoint -24 °C

Main application area 

Universal applicable hydraulic fluids if good ageing resistance, good wear protection and demulsifying properties are required.
Universal hydraulic fluids; synergistic acting and robust additives ensure good wear protection in stationary and mobile hydraulic systems, even at high load and high temperature.

DENISON HF0 approval Bosch Rexroth.
Demulsifying type.

Industries

  • Steel, metals
  • Mining, quarrying, exploration
  • Agriculture, forestry
  • Power generation
  • Machinery, equipment
  • Construction
  • Cement
  • Forging
  • Casting
  • Metal processing
  • Other industries
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 (0) 621-3701-0