Jump to content

RENOLIN CLP 46 PLUS

Description

Range RENOLIN CLP PLUS
High-performance gear and circulating oils offering excellent wear protection, good EP performance and excellent corrosion protection. Carefully selected antioxidants guarantee good ageing stability. Special detergent/dispersant additives offer very good cleaning properties and dirt carrying capacity.
RENOLIN CLP PLUS oils fulfill and surpass the minimum requirements on lubricating oils acc. to DIN 51517-3: CLPD, ISO 6743-6 and ISO 12925-1: CKC, CKD, CKSMP.
RENOLIN CLP PLUS oils were developed especially for the extreme conditions (e.g. in surface mining).

 

Density at 15 °C 882 kg/m³
Flash point cleveland 200 °C
Kinematic viscosity at 40 °C 46 mm²/s
Kinematic viscosity at 100 °C 6.8 mm²/s
VI 102
Pourpoint -27 °C

 

Main application area 

Special gear oils for highly stressed mechanical industrial gears, spur gears, double-spur gears, bevel gears and worm gears. Long-life oils (tested and approved for 30,000 hours in brown coal open pit mining conveyors/gears).
Especially for the use in severe conditions where dirt, dust and water contamination prevail. Increased oxidation stability
Mineral oil based

Industries

  • Mining, quarrying, exploration
  • Agriculture, forestry
  • Power generation
  • Construction
  • Transport
  • Machinery, equipment
  • Cement
  • Forging
  • Casting
  • Metal processing
  • Other industries
  • Steel, metals
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0