SOK AQUA G PLUS
Concrete release agent emulsion, for use in precast concrete plants as well as in building construction and civil engineering
Performance Features
- operating temperature up to 80 °C (formwork temperature)
- does not attack Styrofoam
- easy to wipe off
- largely prevents pore formation
- ensures the production of clean and uniform surfaces
- contains very effective corrosion protection for steel molds
- does not impair the adhesion of plaster, adhesives and paint
Description
SOK AQUA G PLUS is an aqueous concrete release agent emulsion. SOK AQUA G PLUS is solvent-free. SOK AQUA G PLUS is very suitable for use with standard concrete and easy compacting concrete (ECC).
Field of application
SOK AQUA G PLUS is suitable for use in precast concrete plants, building construction and stone production. SOK AQUA G PLUS is particularly suitable for the production of ceilings, walls, large pipes, kerbstones and paving slabs. It is suitable for all common types of formwork, e.g. steel, film-coated timber and plastic formwork.
Application
SOK AQUA G PLUS is applied thinly and uniformly onto the clean and dry formwork using suitable spraying equipment (with UniJet- nozzle TPU-800067-SS). Drop formation and overdosing are to be avoided. Consumption amounts to approximately 1 liter for 40 to 60m² subject to the type of formwork. SOK AQUA G PLUS may not be mixed with release agents, water, oils or solvents. It is ready for use!
Notes
- The container must be protected from frost and direct solar radiation.
- The container is to be well sealed after each withdrawal.
- The product is to be used within 6 months of production (for production date see bar code label).
- Preliminary trials required
Please observe water resources policy act and EU safety data sheet!
The product may not come in contact with zinc or galvanized materials.
The biological degradability of >80% is related to the oil phase (modified storm test, easily biodegradable).
Store cleaning rags wetted with SOK AQUA G PLUS in a closed and approved container.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
