RENOLIN UNISYN CLP 320
The reliable: outstanding performance and long lifetime
Description
The oils of the RENOLIN UNISYN CLP series are demulsifying, fully synthetic industrial gear oils with elevated aging resistance, very good load-carrying capacity and wear protection. RENOLIN UNISYN CLP oils have good resistance to micropitting. Reliable lubrication of roller bearings is confirmed by the good results of the FE8 testing. The required failure load stages in the standard and intensified FZG test are reliably received. Moreover, RENOLIN UNISYN CLP oils show a good filterability. RENOLIN UNISYN CLP oils are preferably used when increased requirements are set for high and low temperature usage limits. Due to the low pourpoint and the high viscosity index very good cold flow properties at cold start as well as a high lubrication film thickness at operating temperatures are possible. In gearboxes and circulating systems with sump temperatures up to 90 °C, longer oil-change intervals in comparison with previous mineral oils are achieved. Miscibility with gearbox oils based on mineral oil and ester is generally given, which means that a simplified change-over to RENOLIN UNISYN CLP is possible.
Specifications
The products meet and, in many cases, exceed the requirements according to:
- DIN 51517-3: CLP
- ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE / CKSMP
- AGMA 9005/E02: EP
- AIST 224
- David Brown S1 53.101
| Density at 15 °C | 860 kg/m³ |
| Flash point cleveland | 260 °C |
| Kinematic viscosity at 40 °C | 320 mm²/s |
| Kinematic viscosity at 100 °C | 35.0 mm²/s |
| VI | 155 |
| Pourpoint | -42 °C |
Application area
The oils of the RENOLIN UNISYN CLP series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C. The RENOLIN UNISYN XT-series is approved by leading gearbox manufacturers. The ISO VG 220 and ISO VG 320 are particularly suitable for use in wind turbines.
Industries
- Wind power
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
