RENOCAST RA 2550
(formerly RENOLIN FORMENOEL 550)
Concrete release agent for use in precast plants
Advantages
- Universally applicable
- Application temperature up to 70 °C (formwork temperature)
- Largely prevents pore formation
- Ensures clean and even surfaces
- No staining
- Good corrosion protection
Description
RENOCAST RA 2550 is a physico-chemically effective concrete release agent based on mineral oil.
Applications
RENOCAST RA 2550 can be used for all common types of formwork, e.g. wood, coated wood materials, steel, plastic, etc. RENOCAST RA 2550 is particularly suitable for use in direct formwork stripping (e.g. cable ducts and concrete sleepers). RENOCAST RA 2550 is applied thinly and evenly to the clean and dry formwork using a brush or suitable spraying device (UniJet TPU 800067-SS). Consumption: with non-absorbent formwork 30-40 m²/l; with absorbent formwork 2030m²/l. The product must not come into contact with copper or zinc. RENOCAST RA 2550 must not be diluted with water, oils or solvents - ready for use!
Notes
The storage period should not exceed 2 years. Store barrels horizontally. Close containers after removal. Observe WHG and EC safety data sheet! Preliminary tests required.
Specifications
RENOCAST RA 2550 can also be used as a core oil. This ensures easy and safe removal of the cores from the cans and good adhesion to the can wall. In addition, it does not dissolve oil-based core binders from the core sand, so the shape of the core remains fully intact after drying. The edges do not crumble. Does not adversely affect the varnishing of wooden core boxes. No odor nuisance.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
