Jump to content

RENOCAST RA 2701

(formerly SOK CT-1)

Clay release agent, preferably for the use in stationary production plants

Performance Features

  • no product-related color changes of the surfaces during kilning
  • the engobe adhesion is not affected
  • universally applicable
  • economical consumption
  • odurless during application

Description

RENOCAST RA 2701 is used in the production of clay roofing tiles.

Field of application

RENOCAST RA 2701 is very well suited for the production of clay roofing tiles, clay bricks, etc.

Method of application

RENOCAST RA 2701 is applied as a thin and uniform protective film using a brush or a suitable spraying device (with UniJet nozzle 800067-SS) onto the clean and dry formwork.
Consumption in case of non-absorbing formwork: 50-130 m²/l. RENOCAST RA 2701 must not be thinned with water, oils or solvents; it is ready for use!

Notes

- Storage temperature not below -5°C.
- The duration of storage should not exceed 2 years.
- Store barrels horizontally
- Seal container after use in order to prevent active ingredients from escaping at higher temperatures.
- Preliminary trials required.

Please observe water resources policy act and EU safety data sheet!

Industries

  • Construction
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0