RENOCAST RA 2740 (Formerly SOK MT)
Concrete release agent preferable for the use in precasting plants
Performance Features
- temperature of use up to 70°C (formwork temperature)
- offers a high adhesive and release effect
- prevents pore formation to a large extent
- provides clean and uniform surfaces
- free of solvents
Description
RENOCAST RA 2740 is a physico-chemically reacting concrete release agent with a high adhesive and release effect on steel.
Field of application
RENOCAST RA 2740 was especially designed for sleeve rings in pipe and manhole production as well as for special applications requiring a high release effect.
Method of application
A thin and uniform layer of RENOCAST RA 2740 is applied onto the clean and dry formwork with a a suitable spraying device (with UniJet nozzle 800067-SS) . The product may also be brushed onto the formwork. Consumption with non-absorbent formwork: 20-40m²/l.
RENOCAST RA 2740 must not be diluted with water, oils, or solvents - it is ready for use!
Notes
- Storage temperature not below -5°C
- Storage period should not exceed 2 years
- Store barrels horizontally
- Reseal containers after use
- Preliminary trials required
WHG (water law) and EG Safety Data Sheet are to be respected!
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.