RENOCAST RA 3310
(formerly SOK SB)
RENOCAST RA 3310 for application in mineral foam production
(previously known as SOK SB)
Performance Features
- easy form removal
- generates clean formwork
- not hazardous to waters ('NWG')
Description
RENOCAST RA 3310 is an especially designed release agent for mineral foam production. It is based on eco-friendly esters.
Field of application
RENOCAST RA 3310 is suitable for the application on heated steel formwork and keeps them clean.
Method of application
RENOCAST RA 3310 is sprayed uniformly, in a thin layer onto the clean and dry formwork. RENOCAST RA 3310 must not be diluted with water, oils or solvents – it is ready for use!
Note
- Storage temperature not below 10°C
- Storage time should not exceed 2 years
- Close containers after removal
- Preliminary trials required
Please observe water resources policy act and EU safety data sheet!
Store cleaning rags wetted with SOK SB in a closed and approved container.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
