SILKOLENE PRO 2
Ultimate Fully Synthetic Ester 2-Stroke Premix engine oil
Description
SILKOLENE PRO 2 is formulated using synthetic components including esters which provide the exceptional anti-seize properties usually only associated with castor-based oils. As well as the synthetic based SILKOLENE PRO 2 incorporates and advanced additive system to protect engine internal even at maximum revs.
Track experience at Grand Prix and international level has shown that SILKOLENE PRO 2 is one of the very few competition oils which can provide the latest racing engines with the outstanding load-carrying and cleanliness requirements necessary for full power output even at high fuel to oil ratios. SILKOLENE PRO 2 utilises aerospace technology to give the ultimate in lubrication and engine protection, and maintains film strength at high temperatures, revs and stresses during on-road or off-road motorcycle and kart racing.
SILKOLENE PRO 2 is particularly resistant to ringsticking and plug fouling problems, and helps to maintain full power output for the track life of an engine. Special additives combat the problem of throttle sticking in wet conditions experienced with some types of racing carburettors.
SILKOLENE PRO 2 combats varnish deposits on and below piston rings preventing ring sticking. Carbon deposits on the piston crown and in the exhaust ports are reduced, giving more efficient ignition, essential when using the latest electronic power valve systems. SILKOLENE PRO 2 helps form a highly effective seal between cylinder, piston and ring, enabling the engine to produce optimum power throughout the rev range. It extends engine life, virtually eliminates small end pick-up and has been seen to double crank life in certain applications.
Application
SILKOLENE PRO 2 is recommend and developed primarily for two-stroke racing engines. SILKOLENE PRO 2 has been used successfully at 50:1 (2%) mixture although users should refer to engine manufacturers' instructions for their specific requirements.
SILKOLENE PRO 2 mixes easily with all types of standard pump fuel and high octane race gasolines, at any ambient temperature and with no separation, even if left to stand for weeks.
SILKOLENE PRO 2 must not be mixed with conventional two-stroke oils. Only for use as a Pre-Mix
Advantages/Benefits
- Suitable for use in on-road, off-road and karting engines
- Ultimate engine protection under full race conditions
- Increased power performance and reliability
- Excellent load carrying capability and wear protection
- Maintains engine cleanliness
Industries
- Consumer, aftermarket
- Automotive
Specifications
- SILKOLENE PRO 2 meets the stringent test requirements of the CIK-FIA (COMMISSION INTERNATIONALE DE KARTING - FEDERATION INTERNATIONALE DE L'AUTOMOBILE) and is a CIK-FIA approved (homologated) lubricant.
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.