LUBSEC 125
Vanishing lubricant for stamping / forming
Description
LUBSEC 125 is a fluid made of paraffinic hydrocarbons, strenghthened with oiliness, antiseize and specific anti-wear additives.
LUBSEC 125 is suitable for forming or stamping of steel or stainless-steel sheets (cutting-off, bending, embossing, forming…).
Application
LUBSEC 125 can be applied either by roller lubricator, drop by drop system, etc. For a practical and economical use, we recommend our low pressure spraying material, our microlubrication kit or our rollers systems LUBOMAT.
Advantages/Benefits
- No particular odour during use
- Excellent lubricating characteristics
- Good sliding characteristics and high EP properties
- Easy cleaning and degreasing with alkaline cleaners or petroleum solvent
- After drying, the residual film is negligible and does not require removal prior to surface treatment or coating
Industries
- Forging
- Metal processing
- Consumer, aftermarket
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.