ECOCOOL SYN 6000
Synthetic cutting fluid with EP properties
Description
ECOCOOL SYN 6000 represents a new generation of oil and boron-free soluble cutting fluids with a high lubrication content and extreme pressure additives, additionally providing good corrosion protection.
Advantages
- It is special because it does not contain emulsifiers, and provides an EP effect that no other semisynthetic fluid provides
- It is very suitable for any machinery and grinding operation, even in severe machining operations where mineral soluble is normally required. Some exceptions would be grinding and some severe machining operations.
- It is very resistant to microbiological attack, despite not containing biocides or fungicides which are considered dangerous
- Low in foam
- Operator friendly
- Free of nitrites, phenolic compounds, butyglycol and additives containing zinc, barium, lead chlorine or sulfur
- After separation of the entered oil and its biological treatment, wastewater shall not contain substances that may affect the environment
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.