Jump to content


Fast evaporation and low residue lubricant


RENOFORM SVO is a low viscosity fluid designed for light gauge stamping on ferrous and non-ferrous materials. Its low viscosity guarantees a low haul to promote a low consumption and economy operation in the operation. It usually leaves very little residue, so normally the cleaning operation is removed. Any residue that may remain in the parts is compatible with most finishing operations. RENOFORM SVO is a mixture of highly refined base oils, so you could say it does not generate odor.

This product creates pleasant working conditions. One of its main properties is the evaporation rate, this allows the parts to be passed to subsequent operations almost immediately.



  • Minimal residue
  • Very low odor
  • Evaporates quickly
  • Low viscosity
  • Usually eliminates cleaning
  • Pleasant to work with
  • Finished parts are ready for finishing
  • Limited carry-off/economy of use


  • Metal processing

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Contact us
(442) 238 9100
+52 442-238-9100
Business hours:

Monday to Friday from 8:30 to 17:30




Acceso C No. 101.




Zona Industrial Jurica; Querétaro, Qro.