ECOCUT 30 EDM
EDM Fluid
Description
ECOCUT 30 EDM is a highly refined dielectric oil for electric discharge machining (EDM). It is intended for precision, fine and rough EDM work. It has excellent oxidative and thermal stability for long bath life. ECOCUT 30 EDM produces finishes which require little after buffing.
How to Use
ECOCUT 30 EDM is used as received for all EDM operations. Your local FUCHS representative can provide you with specific recommendations for your operation. The product should be stored in its original sealed container at temperatures between 7ºC (45ºF) and 32ºC (90ºF). Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- High di-electric strength
- Excellent surface finishes requiring little afterburning
- Outstanding oxidative and thermal stability for long bath life
- High flash point yields low smoking fluid
- Readily flushes from workpieces for easy cleaning
- Crystal clear appearance
- Virtually odourless
- Very low toxicity
How to Clean
Residual films are readily cleaned from parts with Renoclean alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.