ECOCUT GD
Neat Cutting and Grinding Oil
Description
ECOCUT GD is a highly formulated, non-chlorinated low viscosity oil, containing extreme pressure and lubricity additives designed specifically for heavy-duty operations where a light oil is essential
ECOCUT GD is recommended for various applications for deep-hole drilling, gun drilling, machining and grinding as well as other applications requiring heavy duty low viscosity oils.
ECOCUT GD is clear and clean in operation and easy to clean. It is formulated with paraffinic base oils to maximize resistance to oxidation and extend service life in use. The Light viscosity minimizes carry-out and maximizes flushing action. It is also formulated with state of the art high lubricity raw materials in order to ensure excellent surface finishes and wheel life during grinding operations.
How to Use
ECOCUT GD is used as received for all machining operations. Your local FUCHS representative can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 7ºC (45ºF) and 32ºC (90ºF).
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Low viscosity allows oil to penetrate deeply to provide effective cooling of tool and workpiece, rapid swarf removal, and minimal drag-out
- Chlorine free for easier disposal
- Contains lubricity and extreme pressure additives for excellent surface finishes
- Transparent, allowing continuous observation of machining parts
- High anti-welding properties
- Good resistance to oxidation for extended service life
- Easily cleaned from finished work for no “down-line“ problems
How to Clean
Residual films are readily cleaned from parts with Renoclean alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.