ECOCUT HD
High Performance Fine Blanking and Neat Cutting Oil
Description
ECOCUT HD is a very heavy duty fine blanking oil and neat cutting oil for the severest of machining, blanking and forming operations on the hardest metals.
ECOCUT HD is recommended for internal and external broaching, gear cutting, heavy-duty drilling and tapping, fine blanking and the most severe metalworking operations on highly alloyed steels, stainless steels and other hard metals which are difficult to machine, blank or form. This is a Heavy Duty cutting fluid for the most arduous operations and metals.
ECOCUT HD uses high levels of extreme pressure additive and polar fatty materials. These additives ensure high temperature, extreme pressure protection of tooling and superior finish on both ferrous and non-ferrous metal parts.
Advantages
- High levels of extreme pressure and polar fats used to provide extreme pressure performance and protection of tooling and parts
- Anti-mist additives to improve the work environment
- Low viscosity allows oil to penetrate deeply to provide effective cooling of tool and workpiece, rapid swarf removal, and minimal drag-out
- Transparent, allowing continuous observation of machining parts
- Non-corrosive to ferrous and non-ferrous metals
- Low odor
How to Use
ECOCUT HD is used as received for all machining operations. Your local FUCHS representative can provide you with specific recommendations for your operation.
The product should be stored in its original sealed container at temperatures between 7ºC (45ºF) and 32ºC (90ºF).
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.