SAWMASTER 32W
Saw and Sawguide Oil
Description
SAWMASTER 32W was developed specifically for bandsaw applications in the sawmill industry. SAWMASTER 32W has been performing exceptionally well in various sawmills in the United States. This bandsaw oil can be used in most lubrication and misting system currently on the market.
SAWMASTER 32W is specifically formulated to remove pitch buildup on bandsaws resulting in cleaner saws, guides and bandmill wheels. SAWMASTER 32W dramatically reduces the need to clean the saws before benching.
SAWMASTER 32W has been found to have the following additional benefits over most conventional lubricants:
Advantages
Extended Saw, Guide and Wheel Life:
A light film of oil is left on the saw, guide and wheel reducing both friction and heat. In addition to preventing pitch buildup, SAWMASTER 32W contains performance additives designed to reduce wear.
Reduced Water Consumption:
SAWMASTER 32W is effective with minimal water required for consistent cooling. In most mills, the only water used is on the outside of the bandmill to keep the dust down.
Reduced Oil Consumption:
The tackiness of these oils allows for a reduction of the amount used on the bandsaws.
No Staining or Misting:
SAWMASTER AP Series will not stain the lightest coloured woods, maintaining quality of all wood products. Anti-misting secures the health and safety of personnel and keeps scanners and surrounding areas clean.
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) – 32°C (90°F).
Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Agriculture, forestry
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.