ANTICORIT CPD 5400
Solvent Based Dry Film Corrosion Preventive
Description
ANTICORIT CPD 5400 is an odourless solvent based dry film corrosion preventative for ferrous and non-ferrous metals. It passes 90 days in the Humidity Cabinet Rust Test (ASTM D-1748). When properly applied, this coating, is estimated to provide indoor rust-free storage for up to 1 year.
ANTICORIT CPD 5400 contains a highly refined odorless solvent in order to minimize odor. The waxy residual film is readily removed with an alkaline cleaner.
How to Use
ANTICORIT CPD 5400 is applied on dry parts as received in a well-ventilated area using dip, spray or brush methods. When tanks of the product are not in use, they should be covered and sealed to prevent solvent loss.
How to Clean
ANTICORIT CPD 5400 films are readily removed from protected parts by vapor degreasing, solvents or mild alkaline cleaner solutions.
Advantages
- Fast drying
- Water displacing
- Readily cleaned
- Compatible with lubricating oils
- Protective film sets up quickly
- Medium flash point
- Resists corrosion from residual coolant and rinse water
- Avoids “down-line” problems
- May eliminate a cleaning operation
- Safer to use
- Barium Free
- Waxy residue film for easy handling
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) – 32°C (90°F).
Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Metal processing
- Machinery, equipment
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.