ANTICORIT RP 4107 A
Mill Applied Slushing Oil for Steel and Galvanized
Description
ANTICORIT RP 4107 A is a mill applied slushing and/or coating oil typically used in steel mills and service centers manufacturers. It provides excellent indoor protection even under high humidity conditions, and films are readily removed with solvents or alkaline cleaner solutions
ANTICORIT RP 4107 A flows smoothly so it coats surfaces uniformly without breaks in the film. This oil is also used by metal manufacturers when a light oil is desired.
How to Use
ANTICORIT RP 4107 A is applied as received without dilution by spray or roller coat equipment.
Advantages
- Easily applied
- Humidity resistant
- Excellent protection even under high humidity conditions
- Flows and applies evenly
- Smooth uniform coatings
- Readily cleaned
- Avoids “down-line” problems
How to Clean
Residual films are easily cleaned from parts with solvents or alkaline cleaner solutions. Your local Fuchs representative can recommend products for such operations.
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F).
Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.