ECO DRAW HVE 1
Medium Viscosity Synthetic
Description
ECO DRAW HVE 1 is a medium viscosity synthetic lubricant especially effective for stamping, drawing and punching operations. It provides tooling with a light but effective protective film to reduce tooling wear. It sheets over even the oiliest steel for uniform coverage. This is a unique lubricant for multi-metal forming operations. ECO DRAW HVE 1 is a synthetic lubricant that contains no petroleum oils, fats or sulfurized additives. It contains a high level of lubricity additives to reduce galling and fractures.
ECO DRAW HVE 1 keeps stamped parts and tooling cooler than with oils due to its excellent heat transfer film. Resultant light film eliminates parts washing in many applications. ECO DRAW HVE 1 is completely biodegradable and requires no special handling or disposal procedures. It is a safe and clean user friendly product.
How to Use
ECODRAW HVE 1 is diluted with water to form clear solutions.
Concentration: Severe 1:1 to 1:5
Medium 1:5 to 1:10
Light: 1:10 to 1:15
How to Clean
ECO DRAW HVE 1 films and light residues are readily cleaned from processed parts using mild alkaline cleaner solutions.
Advantages
- No petroleum oils, fats or sulphurized additives
- Reduces galling and fractures
- Excellent heat transfer film
- Eliminates parts washing in many applications
- Safe on cold or hot rolled steel and many soft metals
- Safe, clean and user friendly
- Completely biodegradable
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F). Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.