RENOFORM 2117 C
Heavy Duty Water Emulsifiable Drawing and Stamping Lubricant
Description
RENOFORM 2117 C is a heavy duty emulsifiable drawing compound. It is intended for severe drawing, stamping and blanking operations on steel, stainless, aluminium and nickel alloys. It should not be used on copper, brass, or galvanized unless parts are cleaned immediately after forming. RENOFORM 2117 C is water mixable for economical use and ease of cleaning.
How to Use
RENOFORM 2117 C may be used neat or diluted with water as appropriate for the severity of operation. Your local FUCHS representative can provide you with specific recommendations for your operation. When mixing, always add RENOFORM 2117 C concentrate to water. It may be applied neat by roller coater, drip or brush methods, and in flood or spray systems when diluted with water. The product should be stored in its original sealed container at temperatures between 7ºC (45ºF) and 32ºC (90ºF).
Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Heavy duty lubricity package for increased productivity
- Exceptional extreme pressure performance
- Contains polar additives that assures lubricant remains on parts and tools
- Contains inhibitors to prevent corrosion and staining
- Water soluble
- Economical to use
- Readily cleaned
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners or solvents. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.