RENOFORM 7037
Forming Oil
Description
RENOFORM 7037 is a non chlorinated oil designed for medium duty stamping, forming and piercing applications. It can be used on cold or hot ferrous and nonferrous metals. Renoform 7037 is particularly effective on powdered metal gear applications where rust inhibition, lubricity and non staining properties are critical.
How to Use
RENOFORM 7037 is used as received. It can be applied by spray, roller, dip, or flood and performs effectively in recycling systems.
How to Clean
RENOFORM 7037 films and light residues are readily cleaned from processed parts using mild alkaline cleaner solutions.
Advantages
- Contains lubricity and EP additives for extended tool and die life
- Chlorine free for easier disposal
- Suitable for ferrous and non-ferrous metals
- Excellent corrosion protection
- Non-staining
- Low odor
- Versatile
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F). Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.