RENOCLEAN D40
Solvent Cleaner/Degreaser
Description
RENOCLEAN D40 is a petroleum derived product with many uses. This type of solvent, also identified as Mineral Spirits, is a widely used petroleum solvent and can be used as a cleaner/degreaser. It is also used in paint manufacture or thinning, dissolving certain resins or plastics, cleaning and degreasing of metals and vehicle parts etc. RENOCLEAN D40 has a lower odour than conventional mineral spirits.
How to Use
Suitable for metal, concrete, tiled and painted surfaces, and for most plastic and synthetic rubbers. Not recommended for asphalt or bitumen based surfaces.
Advantages
- Excellent degreaser
- Effective cleaner for a wide range of soils and oils
- Lower odour than conventional mineral spirits
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F). Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Machinery, equipment
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.