TITAN CARGO MAXX SAE 10W-40
Premium MAXX Performance Engine Oil with new XTL-Technology
Description
TITAN CARGO MAXX SAE 10W-40 is a Premium Low- SAPS engine oil with the innovative XTL®- Technology developed for commercial vehicles. The XTL®-Technology (Xtreme Temperature Lubrication) offers maximum fuel economy over the whole drain-interval due to outstanding oxidation and ageing stability. TITAN CARGO MAXX SAE 10W-40 guaran- tees optimum protection for modern diesel particulate filters and catalysts and provides improved durability. Due to minimum evaporation loss, the oil consumption and turbocharger deposits are significantly reduced. This new technology offers maximum performance over the entire temperature range and ensures good cold start properties even at very low temperatures. TITAN CARGO MAXX SAE 10W-40 exceeds conventional UHDP lubricants in versatility and performance due to its XTL®-Technology.
Application
TITAN CARGO MAXX SAE 10W-40 is specially developed for commercial vehicles with modern exhaust gas treatment systems. Because of the extensive performance profile TITAN CARGO MAXX SAE 10W-40 is suitable as a rationalization product also for older vehicles. TITAN CARGO MAXX SAE 10W-40 completely fulfills all latest ACEA Ex Specifications in combination with API CJ-4. TITAN CARGO MAXX SAE 10W-40 is miscible and compatible with conventional branded engine oils. In order to fully utilize the product’s benefits, mixing with other engine oils should be avoided and a complete oil change is recommended when converting to TITAN CARGO MAXX SAE 10W-40. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages
- Additional reduction of the fuel economy over the whole drain-interval due to XTL® about 0,5% compared with quality engine oils of the same SAE- viscosity grade
- Prevents from deposits in engines and turbo-chargers
- Up to 23% better pumpability at low temperatures due to XTL®
- Up to 27% lower oil consumption offered by XTL®
- Suitable for longest drain-intervals
- Improved ageing stability due to XTL® and lower viscosity increase in a standardized engine test
- Best protection for modern exhaust gas after treatment systems
- Excellent wear protection even under high operation conditions
- TITAN CARGO MAXX SAE 10W-40 offers a wide application profile and is the rationalisation product for mixed fleets
- High neutralisation behaviour against sour burning residues in combination with latest Low-SAPS technology
- Fulfills all latest ACEA Ex specifications (ACEA E9/E7/E6/E4) in combination with API CJ-4 due to excellent properties of XTL®
Industries
- Automotive
- Consumer, aftermarket
- Agriculture, forestry
- Construction
- Other industries
- Power generation
- Transport
Specifications
ACEA E9/E7/E6/E4
API CJ-4
JASO DH-2
CAT ECF-3
Approvals
DETROIT DIESEL 93K218
DEUTZ DQC IV-10 LA
MACK EO-O PREMIUM PLUS
MAN M 3271-1
MAN M 3477
MAN M 3575
MB-APPROVAL 228.31
MB-APPROVAL 228.51
MTU DDC TYPE 2.1
MTU DDC TYPE 3.1
RENAULT RLD-3
SCANIA LA
VOLVO VDS-4
FUCHS Recommendations
CUMMINS CES 20081
IVECO 18-1804 CLASSE TLS E9
IVECO 18-1809 CLASSE NG2
VOITH-RETARDER „B“
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.