ECOCUT GD 7043
Gun Drilling Oil
Description
ECOCUT GD 7043 is a non-chlorinated, low viscosity oil designed for gun drilling operations. ECOCUT GD 7043 cutting oil has been formulated to be low foaming under high pressure operations. The low odour of ECOCUT GD 7043 makes it compatible with a clean workplace environment.
Advantages
- Low viscosity allows oil to penetrate deeply to provide effective cooling of tool and workpiece, rapid swarf removal, and minimal drag-out
- Chlorine free for easier disposal
- Contains lubricity and extreme pressure additives for excellent surface finishes
- Transparent, allowing continuous observation of machining parts
- High anti-welding properties
- Good resistance to oxidation for extended service life
- Easily cleaned from finished work for no “down-line” problems
- Multi-metal compatible
How to Use
ECOCUT GD 7043 is recommended for machining, deep drilling and other operations requiring a light oil with extreme pressure properties. This product is suitable for ferrous and nonferrous metals.
How to Clean
ECOCUT GD 7043 films and light residues are readily cleaned from processed parts using mild alkaline cleaner solutions.
Storage and Safety
The product should be stored in its original sealed container at temperatures between 7°C (45°F) and 32°C (90°F). Safety data sheets (SDS) are available. Before handling, read the product information and SDS for proper handling and health hazard information.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.