RENOFORM OL 8025
Chlorine-free Forming and Fine Blanking Oil
Description
RENOFORM OL 8025 is a heavy-duty lubricant designed for use in fine blanking and severe forming operations. It is a chlorine-free alternative to highly chlorinated oils typically used in fine blanking and is designed for use on ferrous metals. It can also be used in cold heading operations but is not intended for dual-side use.
RENOFORM OL 8025 contains extreme pressure additives and a lubrication package that can provide protection of tools and the work-piece. It is typically used in moderate fine blanking operations up to 6 mm blanks. Its mid-range viscosity provides better application options and is cleaner operating in the press.
Compared to chlorinated oils and many lubricants composed of sulfurized lard oil, RENOFORM OL 8025 demonstrates improved resistance to corrosion and staining. It is light colored and low odour.
How to Use
RENOFORM OL 8025 is used as received. It can be applied by spray, roller, dip, or flood and performs effectively in recycling systems. The product should be stored in its original sealed container at temperatures between 7ºC (45ºF) and 32ºC (90ºF). Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Heavy duty formula
- Does not contain chlorine
- Compatible with carbide tooling
- Very low odour
- Makes difficult and complex parts
- Easier for disposal
- Low use cost, easy cleaning
- Good “in-process” corrosion protection for ferrous metals
- Extended tool & die life
How to Clean
Residual films are readily cleaned from parts with RENOCLEAN alkaline cleaners. Your local FUCHS representative can provide you with specific recommendations for your operation.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.