RENOCAST GP MOULDER BED & TABLE LUBRICANT
Moulder Bed and Table Lubricant
Description
RENOCAST GP MOULDER BED & TABLE LUBRICANT is an economical, versatile lubricant for use in moulder beds, planer beds and other wood transfer equipment. RENOCAST GP MOULDER BED & TABLE LUBRICANT dries quickly leaving a lubricating film on the moulder bed, planer bed or other wood transfer surfaces. It contains a combination of lubricants that prevents lumber from sticking to the moulder and table components during processing. It acts as a lubricant and release aid. The primary active ingredients are carried in a rapid-evaporating solvent carrier. It is very effective in minimal concentrations.
RENOCAST GP MOULDER BED & TABLE LUBRICANT leaves little or no residue on finished work. It is completely safe to use on various woods. RENOCAST GP MOULDER BED & TABLE LUBRICANT will not affect wood painting, laminating and other finishing operations – it contains no silicone, grease or wax. It will not discolor wood.
How to Use
RENOCAST GP MOULDER BED & TABLE LUBRICANT is used as received without dilution. This can be used in automatic, semi-automatic or anual bed injector systems. This lubricant is light enough to be sprayed in pump bottles. RENOCAST GP MOULDER BED & TABLE LUBRICANT can be used on Weinig, Wadkins, Yates, Madison, Tri-state and Diehl moulders and tables. The product should be stored in its original sealed container at temperatures between 7ºC and 32ºC. Safety data sheets are available. Before handling, read the product information and safety data sheets for proper handling and health hazard information.
Advantages
- Free of silicone, grease, and wax
- Non-staining to all woods
- Leaves little or no residue
- No detrimental effect on painting, laminating and other finishing operations on wood
- Safe on all woods
- Prevents build-up of wood resins on machines
- Prevent sticking of wood on machines
- Low viscosity
- Quick to evaporate and leave lubricant film
- Lubricant and release aid for moulder beds and tables
Industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.