Jump to content

RENEP CGLP 68

Description

Range RENEP CGLP
Mineral oil based slideway oils with lubricity improvers and friction reducing additives. Good EP performance. Protect against
corrosion and prevent stick-slip.
Fulfils and surpasses the requirements acc. to
DIN 51502: CGLP
ISO 6743-13: GA, GB
DIN 51517-3: CLP

 

Density at 15 °C 879 kg/m³
Flash point cleveland 220 °C
Kinematic viscosity at 40 °C 68 mm²/s
Kinematic viscosity at 100 °C 8.6 mm²/s
VI 99
Pourpoint -24 °C

 

Main application area 

Excellent chemical compatibility with water miscible metal working fluids. Slideway oils with very good demulsifying power, very low friction coefficient. HELLER approval. These slideway oils are especially suitable for the use with ECOCOOL cutting fluids. Proven good compatibility with many water miscible cutting fluids. Approved by leading machine tool manufacturers.
Mineral oil based

Industries

  • Steel, metals
  • Mining, quarrying, exploration
  • Machinery, equipment
  • Metal processing
  • Other industries
  • Casting
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0