Jump to content

RENISO TRITON SE 170

Description

Range RENISO TRITON SE/SEZ
Fully synthetic refrigeration oils based on synthetic polyolesters - especially suitable for non-ozone depleting FC/HFC refrigerants, such as R134a, R404A, R507, R410A, R407C. Also suitable for hydrocarbon refrigerants. As polyolester oils strongly tend to absorb water (hygroscopic behavior), the contact of these lubricants with air (atmospheric humidity) has to be limited to a minimum.
DIN 51503: KD, KE.

NEW:
RENISO TRITON SE/SEZ is also suitable for the use with HFO und HFO/HFC refrigerants.

 

Density at 15 °C 972 kg/m³
Flash point cleveland 260 °C
Kinematic viscosity at 40 °C 173 mm²/s
Kinematic viscosity at 100 °C 17.1 mm²/s
VI 106
Pourpoint -27 °C

 

Main application area

The RENISO TRITON SE/SEZ products are perfectly suited for all refrigeration circuits in which chlorine-free refrigerants (HFCs/FCs), e.g. R134a are used. RENISO TRITON SE/SEZ-refrigeration oils are recommended for hermetic, semi-hermetic and open piston compressors, as well as for screw and turbo compressors (depending on viscosity). Comprehensive tests have been performed on the use of RENISO TRITON SE/SEZ products with new refrigerants designed to replace R22, such as R422A/D and R417A.

Based on polyolester

Industries

  • Other industries
  • Transport
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 621-3701-0