CASSIDA FLUID DCE 10 New
Synthetic multifunctional direct contact fluid for food processing applications and manufacturing of packaging for safe and food use
Main Features
- Registered for direct food contact
- Enhanced lubrication properties
- Good compatibility with common material
- Free of PWIS – paint wetting impairment substances, e.g., silicones, PDMS, EBS, PTFE, etc.
- Excellent creeping properties
- Easy and economic application
- Easy to remove and clean
- Neutral in odour and taste: does not turn rancid nor produces any bad smell
- Does not contain any MOH (mineral oil hydrocarbons)
Certifications and Specifications
- NSF 3H, H1
- NSF ISO 21469
- Kosher
- Halal
Description
CASSIDA FLUID DCE 10 is an easy to handle, multipurpose fluid designed for several special applications in food and safe industry. The fluid has been specially developed to be used as forming oil for the manufacture of both two- and three-piece cans for food and beverages (stamping, deep-drawing, and bending).
It can also be used as release agent in several applications, synthetic fibbers manufacture, artificial and collagen casing manufacture, and as absorber fluid for edible oil extraction plant solvent recovery system. Registered by NSF for use in both direct contact applications (Class 3H) and where there is potential for incidental food contact (Class H1).
Produced according to FUCHS Quality Standards, in facilities where HACCP audit and Good Manufacturing Practice have been implemented according to management systems ISO 9001 and ISO 21469.
Applications
- Forming oil for the manufacture of both two- and three-piece cans for food and beverages (stamping, deep-drawing, and bending).
- Stamping and deep drawing of aluminium foils for food-packaging.
- Processing of handling and braiding synthetic fibbers intended for making food mesh bags.
- Manufacture of artificial and collagen casing.
- Absorber fluid for edible oil extraction plant solvent recovery system.
- Release agent for moulds in blister machines used for the deep drawing of film (bottom film).
- Release agent used on grills, loaf pans, cutters, boning benches, chopping blocks or other hard surfaces to help prevent food from adhering during processing.
- Dough Divider lubrication.
- Lubrication of lightly loaded chains.
Application Instructions
Any metal surfaces should be clean and dry before CASSIDA FLUID DCE 10 is applied. The product can be applied by spray can, brush, oil feeder or drip-feed system, air pressured vaporizer or by sprays guns.
Seal and Paint Compatibility
Compatible with the elastomers, gaskets, seals, and paints normally used in food machinery lubrication systems. Polyurethane based elastomers, leather, cork, asbestos paper, and board should be avoided.
Handling and Storage
All food grade lubricants should be stored separately from other lubricants, chemical substances, and foodstuffs and out of direct sunlight or other heat sources. Store between 0 °C and +40 °C. Provided that the product has been stored under these conditions we recommend using the product within 2 years from the date of manufacture.
Industries
- Food
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.