TITAN SUPERSYN D1 SAE 5W-30
Ultra High Performance engine oil offering excellent fuel economy, specifically developed for General Motors petrol engines requiring dexos1™ Gen 3 fluid. Optimum cold start properties and ageing stability for a very good fuel economy throughout the drain interval.
TITAN SUPERSYN D1 SAE 5W-30 fulfils engine oil requirements for vehicles requiring dexos1™ - Gen 3, API SP RC and ILSAC GF-6A or the corresponding previous specifications. ILSAC GF-6A is often used as basis specification by Toyota, Honda, Hyundai/Kia, Nissan, Mazda, and Chrysler; this offers a wide range of applications for this product. TITAN SUPERSYN D1 SAE 5W-30 was developed to offer Low-Speed Pre-Ignition protection and an improved vehicle performance in General Motors applications. TITAN SUPERSYN D1 SAE 5W-30 is not suitable for diesel engines.
Industries
- Automotive
- Consumer, aftermarket
Specifications
API SN PLUS RC
API SP RC
ILSAC GF-6A
Approvals
dexos1TM Gen 3 (D335ABDF075)
FUCHS Recommendations
FORD WSS-M2C929-A
FORD WSS-M2C946-A
FORD SS-M2C946-B1
FORD WSS-M2C961-A1
FIAT 9.55535-CR1
CHRYSLER MS 6395
GM 6094M
GM 4718M
ILSAC GF-5
VWC 53034
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.