CEPLATTYN RN
Sprayable running-in lubricant for open gears
Description
CEPLATTYN RN is a running-in lubricant for open gears based on an aluminium complex thickener, mineral oil and graphite. CEPLATTYN RN is characterised by an improvement of the tooth flank engagement and thus increases the service life of the gear.
Together with CEPLATTYN 300 (primer) and the CEPLATTYN KG 10 HMF series (operating lubricant), CEPLATTYN RN forms a balanced system of FUCHS multiphase lubrication (MPL) for open gears.
The operating temperature range of CEPLATTYN RN is -10 to +140 °C.
Application
CEPLATTYN RN was specifically developed for the following application(s):
- Open gears
Advantages
- Smoothes and reduces surface roughness
- Improves the load-carrying behavior of the tooth flanks
- Chlorine and heavy metal free formulation
- Good sprayability
Storage Conditions
The minimum shelf life is 36 months if the product is properly stored between 0 °C and 40 °C in its unopened original container in a dry place. The indication of a minimum shelf life does not include any guarantee of durability.
Notes
CEPLATTYN RN is applied via automatic spraying systems: The spraying process is continuous and uses the maximum lubricant quantity to ensure both rapid heat dissipation and effective removal of the inevitable wear particles from the gear mesh. Running-in of gears should start only after best alignment of the gear. Primary lubrication of tooth flanks should be effected with CEPLATTYN 300. Safety and disposal instructions can be found in the current safety data sheet.
Industries
- Cement
- Forging
- Mining, quarrying, exploration
- Steel, metals
- Power generation
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.