Jump to content

Care for your cutting fluid before longer breaks

Many choose to change their cutting fluid and clean tanks, chip conveyors, etc. Others choose to save the fluid over the holiday periods. Whichever option you choose, there are some things to consider before a holiday break.

Change of fluid
When replacing the coolant, add ECOCOOL CLEAN 1 with 1.5% concentration in existing cutting fluid. Run normal operation for at least 24 hours, drain the fluid and clean mechanically. Fill up with new cutting fluid.

Keeping the fluid
If you choose to keep the cutting fluid during the holiday break, you should adjust the pH by adding 0,1-0,2% ECOCOOL PH-BOOSTER 1 and possibly 0,2-0,4% ECOOOL PH-BUFFER 9 or 0,15% Contram NBF-21 in systems before stopping.

Please contact us if you want to know more.

ProductPackagingArticle no.
ECOCOOL CLEAN 120 liter can601402432
ECOCOOL CLEAN 1208 liter barrel601402418
ECOCOOL PH-BOOSTER 120 liter can601402500
ECOCOOL PH-BUFFER 920 liter can601400179
ECOCOOL PH-BUFFER 9208 liter barrel601400186
Contram NBF-215 liter can800267665

Contact our customer service for order by phone at +358 20 7459 660 or e-mail fuchs@fuchs-oil.fi

Service Kontakt
+358 20 7459 660