RENOLIT J-25C
Lithium – molybdenum complex grease capable of withstanding high thermal and mechanical loads
Performance Features
Long grease life at high temperatures
Excellent wear protection
Good EP capability
Extended service intervals due to its high drop point and thermal & mechanical stability
Recommended service temperature: -20 °C to 160 °C
Description
Renolit J 25 C is Mineral Oil with MoS2 as a solid lubricants for high load carrying capacity (Weld Load 4000 N & high drop point +250*C. Withstand Shock load & extends relubrication interval
Field of application
Bearings subjected to shock load, high pressure, dynamic load water resistance & good corrosion protection, is used for the lubrication of any kind of plain and roller bearings subjected to high constant mechanical loads, increased themperatures and unfavourable friction conditions, e.g. in general engineering, in the chemical, iron, steel, construction machinery and automotive industries.
Method of application
Renolit J 25 C can be used by any centralised Lube system or manual grease gun
Note
Shelf life 3 years
Industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.