GLEITMO 700
合成油をベースにした二硫化モリブデンペースト
GLEITMO 700は、二硫化モリブデンを非常に多く含む合成油をベースにした組立・潤滑用ペーストです。200℃以上の温度では、合成油は残留物をほとんど出さず、鉱物油と比較して、さらなる潤滑性をわずかに損なうだけです。さらに、鉱物油に耐性のないほとんどの部品を侵さないという利点もあります。合成油が蒸発した後の乾燥した潤滑膜は、焼き付きを防ぎ、低摩耗の動作を可能にします。このタイプの潤滑は、低速の動きにのみ使用されます。
性能の特徴
温度範囲: -40 / +400 °C
200 °C以上の温度では、固体潤滑剤による完全なドライ潤滑が可能
高温環境や鉱物油に耐性のない部品に最適
組立・分解が容易
摺動面を摩擦による損傷から保護
最高温度+400 °Cでは、限定的ではあるが有用な潤滑が可能。すべてのオイルやグリースが使用できない+400 °Cまでの温度で、限定的ではあるが有用な潤滑が可能。
高温下でも厄介な残留物を残さない
適用分野
GLEITMO 700は、高温域でのあらゆる潤滑に使用されます。オイルやグリースを使用できない温度での潤滑は、例えば炉車のベアリング(すべり軸受ところ軸受)などです。さらに、GLEITMO 700は組み立てや慣らし運転の用途にも適しています。GLEITMO 700は、製鉄所のコンベヤローラやコンバータに使用されています。
適用方法
GLEITMO 700はグリスではありません。硬いブラシを使って薄い膜を塗布してください。組み立てのためにGLEITMO 700を塗布する前に、摺動面を脱脂してください。ローラーベアリング:転動体の間のガイドウェイを軽く叩き、ベアリングを短時間回転させ、過剰にならないようにします。給餌装置にGLEITMO 700を使用する場合は、お問い合わせください。
Industries
- 鋳造
- 発電
- スチール、金属
- 輸送
- 鍛造
- セメント、石炭、石膏
- 採鉱、採石、探鉱
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.