TITAN UTTO WB
Description
TITAN UTTO WB is an Ultra High Performance multifunctional oil (UTTO/MFO) for use in transmission and hydraulic systems, axles and differentials with and without integrated wet brakes or clutches. It is specially developed for use in construction machinery and the requirements in the respective aggregates. As TITAN UTTO WB is based on a careful selection of base oils and additive technology, it guarantees an excellent wear protection, good viscosity and temperature behaviour as well as best friction properties.
Application
TITAN UTTO WB is used in axles with or without limited slip differential, gears and final drives with or without wet brakes. Due to its special additive composition, it becomes excellent deceleration values during braking processes and suppresses noise over the entire oil change interval. TITAN UTTO WB is miscible and compatible with conventional branded gear oils. However, mixing with other gear oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN UTTO WB. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages/Benefits
- Especially for use in construction machinery
- Excellent wear protection for axles, gears and hydraulic systems
- Optimized dirt carrying capacity
- Proven compatibility with seals and non-ferrous metals
- Best friction and noise behaviour
- Very good viscosity and temperature behaviour
- Extensive profile for product rationalization
Industries
- Agriculture, forestry
- Consumer, aftermarket
- Cement
- Transport
- Mining, quarrying, exploration
- Construction
- Automotive
Specifications
Approvals
- VOLVO WB 101
- ZF-TE ML 03E, 03F, 05F, 06K (ZFxxxxxx)
FUCHS Recommendations
- AGCO Q-1826 (Whitefarm), Powerfluid 821 XL
- ALLISON C-4
- API GL-4
- CASE MS 1210, 1209, 1207, 1206, 1205, 1204
- CATERPILLAR TO-2
- CNH MAT 3505, 3506, 3525
- FNHA-2-C-201.00
- FORD ESN M2C41-B, M2C53-B, M2C92-A, M2C134-D
- JOHN DEERE JDM J20C
- JOHN DEERE JDM J20D
- KUBOTA UDT FLUID
- MASSEY FERGUSSON CMS M 1145, 1143, 1141, 1135
- SAE J300: 10W-30
- ZF TE-ML 03L
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.