LUBRODAL F 24 W
Water-miscible die lubricant, containing graphite
Performance Features
- can be used for metal working and casting operations as well as for warm forging
- can be diluted with water as required
- can be used at mid-range and high temperatures
- acts as a lubricant, release agent and coolant
- creates a flexible, lubricant film on the dies, which will not run off
- an effective alternative to conventional graphite/water and graphite/oil suspensions
Description
LUBRODAL F 24 W contains finely ground graphite in a water based emulsion which contains oil. LUBRODAL F 24 W is a homogenous, low-sediment, concentrated lubricant which can be diluted with tap water to any strength required. LUBRODAL F 24 W was specifically developed for warm steel forging operations. However, it can also be used for other metal working procedures.
Areas of application
LUBRODAL F 24 W is particularly suitable for high-lycomplex forging operations involving mid-range and high temperatures, e.g. for lubricating dies during warm and hot forging operations or for lubrication during semi-hot forging. In addition to its lubricating and release properties, LUBRODAL F 24 W also acts as a tool coolant. This is due to its water content. LUBRODAL F 24 W may be used in any situation where traditional graphite and water dispersions have reached the limit of their effectiveness. LUBRODAL F 24 W is an effective and economical alternative to the traditional graphite and oil suspensions used in semi-hot forging procedures.
Method of application
LUBRODAL F 24 W is a die lubricant which must be thinned with water before use. The optimum proportions of water to lubricant depend on the application, and must be tried out on site in each particular case. Depending on how it is to be used, LUBRODAL F 24 W can be mixed with water using a suitable mechanical stirrer. Despite the fact that the suspension is extremely stable, we recommend that the working liquid be continuously stirred to prevent any of the particles settling out.
LUBRODAL F 24 W can be applied to forging tools with any of the commonly used spraying equipment (automatic or manual). Its excellent wetting properties means that it can create an effective; lubrication film, even in the deepest cuts in the die.
Storage
LUBRODAL F 24 W must be stored in a closed container to prevent water evaporation creating a skin.
Guidelines for dilution:
Die forging: 5...10 parts water, 1 part LUBRODAL F 24 W
Hot forging (extrusion): 3...7 parts water, 1 part LUBRODAL F 24 W
Hammer forging: 2...10 parts water, 1 part LUBRODAL F 24 W
Semi-hot forging, complex operation: 1...2 parts water, 1 part LUBRODAL F 24 W
Semi-hot forging, subsequent stages: 2...5 parts water, 1 part LUBRODAL F 24 W
Галузі
- Forging
- Metal processing
Представлена тут інформація ґрунтується на досвіді й експертних знаннях групи компаній FUCHS у сфері розроблення та виробництва мастильних матеріалів і останніх технологічних розробках. На характеристики нашої продукції можуть впливати різні чинники, зокрема специфіка застосування, метод застосування, кліматичні умови, попередня обробка компонентів, можливі зовнішні забруднення тощо. Із цієї причини неможливо вказати дійсні, універсально застосовні дані щодо експлуатаційних характеристик наших продуктів. Наші продукти не можна застосовувати в літаках / космічних кораблях або їхніх деталях. Це положення не діє, якщо продукти можна видалити до встановлення компонентів у літак / космічний корабель. Наведена тут інформація є рекомендаціями загального характеру. Виробник не надає жодних прямих або передбачуваних гарантій щодо властивостей продукту чи його придатності для певних умов застосування. Перед використанням продуктів рекомендуємо звернутися до фахівця групи компаній FUCHS із застосування продуктів, щоб обговорити умови їхнього застосування та критерії продуктивності. Користувач відповідає за перевірку функціональної придатності продуктів і їхнє належне використання. Наша продукція безперервно вдосконалюється. Тому ми лишаємо за собою право змінювати асортимент продукції, продукти, які випускаються, та процеси їхнього виготовлення, а також наведені тут відомості в будь-який час і без попереднього сповіщення за умови, що укладені з конкретним замовником угоди, які містять інші вимоги, відсутні.