RENOLIN PG 680
Description
Range RENOLIN PG
Fully synthetic gear and lubricating oils based on special polyalkylene glycols (PAG) for applications with extreme thermal loads. Very high oxidation and ageing stability, high viscosity index (shear stable), good viscosity-temperature behavior, excellent load-carrying capacity, low friction coefficients, high FZG, very good pitting and high micropitting resistance, excellent FE8 performance.
The oils of the RENOLIN PG series surpass the minimum requirements of CLP-PG lubricating oils according to DIN 51517-3, ISO 6743-6 and ISO 12925-1: CKC, CKD, CKE, CKSMP, CSPG, CTPG.
Approved by leading gearbox manufacturers.
| Density at 15 °C | 1075 kg/m³ |
| Flash point cleveland | 280 °C |
| Kinematic viscosity at 40 °C | 680 mm²/s |
| Kinematic viscosity at 100 °C | 110.3 mm²/s |
| VI | 261 |
| Pourpoint | -33 °C |
Main application area
For gearboxes operating in extreme thermal and mechanical conditions, such as worm gears. Can also be used as compressor oils for process gases such as methanke, ethane, propane, etc. due to low hydrocarbon gas solubility.And might be used for calender lubrication.
RENOLIN PG is especially suitable for steel / bronze sliding pairs in worm gears. Not miscible or compatible with mineral oils, ester oils and PAO-based oils.
Change-over guidelines must be observed.
Based on Polyglycol
Industries
- Mining, quarrying, exploration
- Agriculture, forestry
- Power generation
- Construction
- Transport
- Machinery, equipment
- Cement
- Forging
- Casting
- Metal processing
- Other industries
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
