TITAN GT1 PRO 2312 SAE 0W-30
Description
TITAN GT1 PRO 2312 SAE 0W-30 was developed to meet modern requirements; it is based on selected base oils and state-of-the-art additive technology. Due to its additive technology with reduced SAPS content (Sulphated Ash, Phosphor and Sulphur) TITAN GT1 PRO 2312 SAE 0W-30 protects exhaust gas aftertreatment systems and improves their durability. TITAN GT1 PRO 2312 SAE 0W-30 also reduces fuel consumption compared to conventional viscosity grades.
Application
TITAN GT1 PRO 2312 SAE 0W-30 was especially developed for the PSA specification B71 2312. This specification is mandatory for the new Stellantis Euro 6 DV and DW diesel engines. Additionally, this specification can be used in many other PSA petrol and diesel vehicles with longest oil drain intervals. TITAN GT1 PRO 2312 SAE 0W-30 is ideally suited for a large number of Asian manufacturers. TITAN GT1 PRO 2312 SAE 0W-30 should only be used in diesel engines, when also low sulphur diesel fuel is used. TITAN GT1 PRO 2312 SAE 0W-30 is miscible and compatible with conventional, branded engine oils. However, mixing with other engine oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended when converting to TITAN GT1 PRO 2312 SAE 0W-30. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages
- Protects exhaust gas aftertreatment systems because of a low content of sulphated ash, phosphorus and sulphur (Low-SAPS).
- Outstanding oxidation stability.
- Excellent engine cleanliness.
- Superior protection from deposits in engines and turbochargers.
- Extremely low oil consumption due to minimised evaporation loss.
- Excellent cold start behaviour and fast oil circulation in the whole engine at low temperatures.
- Outstanding fuel efficiency and thus reduced CO₂ emissions. ▪ Suitable for selected hybrid vehicles subject to OEM requirements
Industries
- Cement
- Consumer, aftermarket
Specifications
- ACEA C2
Approvals
- PSA B71 2312
FUCHS Recommendations
- CHRYSLER MS-13340
- CHRYSLER MS.90047
- FIAT 9.55535-DS1/GS1
- IVECO 18-1811 CLASSE SC1 LV
- IVECO 18-1811 CLASSE SC1 LV-16
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.