ECOCOOL FE 40
Product description
ECOCOOL FE 40 is a semi-synthetic water miscible cutting fluid free from boron, formaldehyde and volatility amines. The product consists of highly refined mineral oil and carefully selected additives in order to extend the tool life and provide the best lubricating effect.
Application areas
ECOCOOL FE 40 is specially designed for all types machining in composite materials for aerospace industry and for all types of cutting and grinding operations in cast iron and steel. The product may stain sensitive alloys of aluminum or copper. Do a staining test before starting any cutting operation in sensitive alloys of aluminum or copper.
OBS! The concentrate shall always be added to the water. Recommended concentration is 6%-12%. The optimum mixing temperature for water and concentrate is 15 - 20°C.
Characteristics and advantages
ECOCOOL FE 40 is developed with new technique that minimize soap formation. The product is free from boron, formaldehyde and volatility amines in order to provide an optimal working environment for the operators. ECOCOOL FE 40 has very good cleaning effect with an outstanding corrosion protection. The product gives good lubrication, fast tram oil rejection and low drag out losses.
Tests and approvals
Approved by Lockheed Martin and Northrop Grumman for machining composite materials.
Handling and storage
Avoid skin contact. In the event of contact with skin, wash with soap and water. Store the product indoors at a temperature of between 5°C to 30°C. Dispose of used fluid at a recycling station or equivalent. Safety data sheets are available on www.fuchs.com/no or supplied on request
Industries
- Metal processing
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.