SOK HU2-E
Concrete release agent for the use in precasting plants
Performance Features
- temperature for use up to 75 °C (form temperature)
- prevents the formation of pores and shrinkage holes to a large extent
- provides clean and uniform surfaces
- no adverse effect on plaster, glue and paint adhesion
Description
SOK HU2-E is a physico-chemically reacting concrete release agent.
Field of application
SOK HU2-E is a special product for direct removal of the formwork (e.g. HUMARBO machinery, systems for the production of slatted floors, concrete sleepers, etc.).
Method of application
A thin and uniform layer of SOK HU2-E is applied onto the clean and dry formwork using a brush or a suitable mineral oil-resistant spraying device (with T-jet nozzle SS 800067).
Consumption with non-absorbent formwork:
40-60 m2/l.
The product must not get into contact with copper or zinc.
SOK HU2-E must not be diluted with water, oils or solvents - the delivered concentration is ready for use!
Note
- storage temperature not below -5 C
- storage period should not exceed 1 year
- store barrels horizontally
- reseal packaging after use
WHG and EC safety data sheet are to be respected!
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.